Production Advantage
JINCHENG 1A1R Resin bond diamond cutting wheels use resin as the bonding matrix. First, diamond abrasives are fully blended with resin powder and fillers.
Application
JINCHENG 1A1R resin-bond diamond cutting discs are specially designed for precision cutting of super-hard and brittle materials.
They are widely used in carbide tool manufacturing, industrial ceramics, optical glass, photovoltaic glass, silicon wafers, sapphire substrates, neodymium magnets
and carbon fiber composites.
Advantage
Compared with conventional abrasive cutting wheels, our diamond cut-off wheels have obvious advantages:
1.Long service life, 20–50 times longer than ordinary abrasive discs.
2.Sharp cutting performance with good self-sharpening, no clogging during continuous processing.
3.Ultra-narrow kerf saves raw material cost and produces smooth burr-free cutting surfaces without chipping.
4.Low cutting heat prevents workpiece cracking , greatly reducing reject rates.
5.High structural stability ensures safe running on automatic cutting machines with little vibration.
6.Ideal for high-volume precision cutting of tungsten steel, ceramics, glass and hard magnetic materials.
Production Process
JINCHENG 1A1R Resin bond diamond cutting wheels use resin as the bonding matrix. First, diamond abrasives are fully blended with resin powder and fillers.
The mixture is filled into moulds and cold-pressed at room temperature to form blanks. The blanks are then heated and cured at low temperature in an oven,
solidified by resin. Finally, the wheels are trimmed, edged and inspected. This process requires low temperature and low pressure, with a short production cycle
and low mould loss, suitable for mass rapid production.
If you need our products please write down any questions, we will reply as soon as possible.
